#145: Direct-numerical simulation of droplet breakup in homogeneous isotropic turbulence
[Session S2; Room 405]
Palas Kumar Farsoiya (Princeton University); Luc Deike (Princeton University); Rodney O. Fox (Iowa State University)
#293: Analysis of particle impact deformation by material point method
[Session S1; Room 405]
Saba Saifoori (University of Leeds); Saeid Nezamabadi (University of Montpellier); Mojtaba Ghadiri (University of Leeds)
#332: Influence of the oxygen concentration on the breakup of liquid metal droplets
[Session S3; Room 405]
Leopold J Winter (Technical University of Munich); Thomas Hopfes (Technical University of Munich); Marcus Giglmaier (Technical University of Munich); Nikolaus Adams (Technical University of Munich)
#336: Rate kinetics of agglomeration and deagglomeration of nanoparticles using DEM
[Session S4; Room 405]
Alok Tiwari (IIT Bombay); Manaswita Bose (IIT Bombay)
#399: Influence of viscosity and surface wettability on drop-wall impact
[Session S2; Room 405]
Ghoku Krishnan (University of Virginia); Kevin Fletcher (University of Virginia); Trevor Marchhart (University of Virginia); Eric Loth (University of Virginia)
#441: Interaction of a bubble with a vortex-ring in the presence of surfactants
[Session S1; Room 405]
Maria Zednikova (Institute of Chemical Process Fundamentals of the CAS); Tereza Semlerová (Institute of Chemical Process Fundamentals of the CAS); Jaroslav Tihon (Institute of Chemical Process Fundamentals of the CAS); Tereza Travnickova (Institute of Chemical Process Fundamentals of the CAS); Jaromir Havlica (Institute of Chemical Process Fundamentals of the CAS); Sandra Orvalho (Institute of Chemical Process Fundamentals of the CAS)
#543: Obstruction of spreading droplets on a flat surface by non-deformable objects
[Session S2; Room 405]
Marcus Horwich (Imperial College London); Yannis Hardalupas (Imperial College London)
#623: Mass log-stable distribution of fragments in liquid-liquid fragmentation with solidification
[Session S3; Room 405]
Nicolas D. Rimbert (Université de Lorraine); Miloud Hadj Achour (LEMTA Université de Lorraine); Gagan Kewalramani (LEMTA Université de Lorraine); Bowen Ji (LEMTA Université de Lorraine); Alexandre Labergue (LEMTA Université de Lorraine); Michel Gradeck (LEMTA Univeristé de lorraine); Renaud Meignen (IRSN)
#670: Impact efficiency of fine particles interacting with a collector under different flow conditions
[Session S1; Room 405]
Martin Sommerfeld (Otto-von-Guericke University Magdeburg); Manuel A. Taborda (Otto-von-Guericke University Magdeburg)
#770: CFD-DEM model of cohesive particle collision
[Session S4; Room 405]
Nazerke Saparbayeva (Western Norway University of Applied Sciences); Pavel Struchalin (Western Norway University of Applied Sciences); Boris V Balakin (Western Norway University of Applied Sciences)
#772: Early and late splashes during drop impact onto a quiescent liquid film
[Session S4; Room 405]
Tomio Okawa (The University of Electro-Communications); Katsuyuki Kawa (The University of Electro-Communications); Kohei Kubo (The University of Electro-Communications)
#794: Large eddy simulations of primary breakup in metal melt gas atomization
[Session S3; Room 405]
Dennis P.L. Thuy (Eindhoven University of Technology); Joris Remmers (Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology); Giulia Finotello (Eindhoven University of Technology)
#801: Collision of ice particles with an ice surface studied by positron emission particle tracking (PEPT)
[Session S1; Room 405]
Yu-Fen Chang (Western Norway University of Applied Sciences); Pavel Struchalin (Western Norway University of Applied Sciences); Boris V Balakin (Western Norway University of Applied Sciences)
#811: Fragmentation of water droplets dispersed in butter under mechanical agitation
[Session S2; Room 405]
Antoine Violas (Laboratoire de Génie Chimique); Kevin Roger (Laboratoire de Génie Chimique); Paul Duru (Institut de Mécanique des Fluides de Toulouse); Olivier Masbernat (Laboratoire de Génie Chimique)
#843: Multivariate population balance modeling of inclusion behavior in liquid metal processes
[Session S3; Room 405]
Ashok Das (Institut Jean Lamour, Université de Lorraine); Jean-Sebastien Kroll-Rabotin (Institut Jean Lamour, Université de Lorraine); Thibault Quatravaux (Institut Jean Lamour, Université de Lorraine); JP Bellot (Institut Jean Lamour, Université de Lorraine)