#109: Numerical simulation of surfactant-laden emulsion formation in a stirred vessel
[Session S12; Room 503]
Fuyue Liang (Imperial College London); Juan P. Valdes (Imperial College London); Lyes Kahouadji (Imperial College London); Seungwon Shin (Hongik University); Jalel Chergui (LISN-CNRS); Damir Juric (LISN-CNRS); Omar Matar (Imperial College London)
#115: modelling and simulation of particle milling in a stirred tank using a coupled approach CFD-PBE
[Session S12; Room 503]
Zoé Am Mercier (CEA); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Maxime Pigou (IMFT); Eric Climent (IMFT); Jean-Philippe Bayle (CEA, DES, ISEC, DMRC, Universite de Montpellier); Eric Tronche (CEA, DES, ISEC, DMRC, Universite de Montpellier)
#117: Direct numerical simulations of the dispersion dynamics of complex flows in static mixers with surfactants
[Session S10; Room 503]
Juan P. Valdes (Imperial College London); Fuyue Liang (Imperial College London); Lyes Kahouadji (Imperial College London); Seungwon Shin (Hongik University); Jalel Chergui (LISN/CNRS); Damir Juric (LISN/CNRS); Omar Matar (Imperial College London)
#303: Numerical study of the flow dynamics of bi-swirl injector using OpenFOAM
[Session S11; Room 503]
Vishnu Natarajan (Pusan National University); Jeong-Yeol Choi (Pusan National University)
#306: Scale down of a mixer: validation of a numerical model and investigation of the droplet size distribution
[Session S10; Room 503]
Quentin Laine (CEA); Tojonirina Randriamanantena (CEA); Fabrice Lamadie (CEA); Eric Olmos (Université de Lorraine)
#358: Electroosmotic migration and mixing of viscoelastic fluid in micro nozzle/diffuser
[Session S11; Room 503]
Ameeya Kumar Nayak (IIT Roorkee); Minakshmi Majhi (IIT Roorkee); Bernhard Weigand (University of Stuttgart)
#544: Identification of compartments in stirred tank reactors by analysing Lagrangian coherent structures from velocity fields derived by the lattice-Boltzmann-method
[Session S12; Room 503]
Christian Weiland (Hamburg University of Technology); Eike Steuwe (Hamburg University of Technology); Alexandra von Kameke (Hamburg University of Applied Sciences); Marko Hoffmann (Hamburg University of Technology); Michael Schlüter (Hamburg University of Technology)
#562: Development of an experimental protocol to study the effect of shear rate on sweep flocculation in a water-in-oil emulsion
[Session S11; Room 503]
Marcio B Machado (University of Alberta); Aakanksha Bhargava (University of Alberta); R. Sean Sanders (University of Alberta)
#594: Numerical investigations of mixing in a shallow vessel: role of recirculatory flow structures and turbulent transport
[Session S12; Room 503]
Sayantan Biswas (IIT Delhi); Vivek Buwa (IIT Delhi)
#596: Hydrodynamic characterization and identification of heterogeneities in stirred tank reactors by means of 4D particle trajectories
[Session S12; Room 503]
Jürgen Fitschen (Hamburg University of Technology); Felix Kexel (Hamburg University of Technology);Sebastian Hofmann (Hamburg University of Technology); Maike Kuschel (Boehringer Ingelheim Pharma GmbH & Co. KG); Marko Hoffmann (Hamburg University of Technology); Thomas Wucherpfennig (Boehringer Ingelheim Pharma GmbH & Co. KG); Michael Schlüter (Hamburg University of Technology)
#654: Flow and mixing in a rotating spherical container with a gas-liquid interface
[Session S10; Room 503]
Daiki Watanabe (Osaka University); Susumu Goto (Osaka University)
#677: Numerical study of mixing in reactive jet impingement (ReJI) for 3D bioprinting
[Session S11; Room 503]
Elfego Ruiz-Gutierrez (Newcastle University); Josef Hasslberger (Bundeswehr University Munich); Markus Klein (Bundeswehr University); Kenny Dalgarno (Newcastle University); Nilanjan Chakraborty (Newcastle University)
#726: Numerical study of ethanol into water mixing using split and recombine micromixer
[Session S10; Room 503]
Amritendu B Ghosh (Indian Institute of Technology Kharagpur); Arnab Atta (Indian Institute of Technology Kharagpur)